Beschreibung
FEATURES:
W009 Firmware Updates on February 10, 20151. XINPUT Mode: To switch the controller buttons to A-A, B-B,X-X,Y-Y by pressing and holding the button ?START? and ?A? for 3 seconds. To switch the controller buttons to A-B, B-A, X-Y, Y-X by pressing and holding the button ?START? and ?B? for 3 seconds. All changes will be saved automatically.
2. DINPUT Mode: If you plug the adapter into your PS3 console while in this mode, your Wii U Pro Controller will be recognized as a PS3 Controller, and only supports one controller. Supports up to four controllers if you use this adapter on your PC USB in this mode.
● Wirelessly connects your Wii U Pro controllers to your PCPS3.
●Bluetooth v2.1 with EDR (enhanced data rate) for superior wireless performance.
●Supports Turbo/Auto Fire function (see ?Operation Notes?)
●Supports the built-in Vibration Feedback with no delays.
●Supports ?Games for Windows? proprietary input protocol.
●Functioning distance of up to 33 feet away from adapter.
●Plug and Play on PS3. No Turbo function and no Vibration Feedback when used on PS3.
● Input Switch with 2 input protocol modes for extra versatility.
Direct Input (standard HID protocol) supports 4 controllers at the same time.
Xinput (Xbox 360 controller protocol) supports one controller per individual adapter.
●Supports Amazon Fire TV under the Xinput mode (Info: The Dinput mode does not support Fire TV)
● All buttons (except for ?Power? button), shoulder triggers, analog sticks and their click-in tops are fully functional.
● Compatible with Windows 98,XP,Vista and Windows 7 and Windows 8(32 bit and 64 bit versions),Windows 10.
HOW TO SET UP (For PC):
Step 1: Install the driver software from the included CD.
Step 2: Plug the adapter into an empty USB slot on your PC.
Step 3: For the initial syncing, press the ?SYNC? button on the adapter itself
and on the bottom of your controller, you?ll find that the blue LEDs on your
controller and the red LED on the adapter will flash quickly. Once the syncing
process is complete, the LED on the adapter and your controller will stay lit.
If set to DINPUT mode, the "Player Number" LEDs on your controllers will light
up in the order in which your controllers have been synced to the adapter.
Step 4: Switch to ?DINPUT? or ?XINPUT? mode by using the switch located on the
side.
Step 5: To disconnect all controllers and turn off the adapter, press the Power
button on your controller for 2 seconds.
HOW TO SET UP (For PS3):
Step 1: Switch to ?Dinput? mode by using the switch located on the side.
Step 2: Plug our adapter to your PS3 USB port
Step 3: For the initial syncing, press the ?SYNC? button on the adapter itself
and on the bottom of your controller, you?ll find that the blue LEDs on your
controller and the red LED on the adapter will flash quickly. Once the syncing
process is complete, the LED on the adapter and your controller will stay lit.
Step 4: To disconnect all controllers and turn off the adapter, press the Power
button on your controller for 2 seconds.
OPERATION NOTES:
● How to set the Turbo function:
To set Turbo for individual buttons, press and hold the HOME button and the
button you wish to set Turbo for. To remove the setting for that specific button,
press and hold the HOME button and the button you previously set Turbo for. To
clear all Turbo settings for all buttons, quickly press the HOME button twice
within half of a second.
●If the Input Switch is set to the "Direct Input" mode, the controllers are
recognized as standard Human Interface Device. Your controllers can be
calibrated at the Windows Gamepad Setup screen. Up to four controllers can be
recognized by a single adapter while in this mode.
● Setting the switch to "Xinput Mode" will make it possible to fool certain PC
games which lock out proper input modes from the user unless an Xbox controller
is attached (for a list of these games, check Wikipedia). While in Xinput Mode
Vibration Feedback is available. The drawback is that while in this mode, only
one controller can be recognized by the adapter.
●If you want to map your buttons to Keyboard Keys, look for Joy2Key software
online.
